Basic Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay : Illumra

How can we help you today?

Basic Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay Print

Modified on: Wed, 24 Aug, 2016 at 9:41 AM

Basic Linking

1: Hold Menu button for 5 seconds, until relay begins to click, then release the button. If a load is connected it will begin to cycle on and off.

2. Triple press the top button on the switch. The relay should pause in the on position indicating a link was created. If it pauses in the off position, you have just unlinked the switch

3. Wait 15 seconds for the device to exit basic linking. It will stop clicking when it does.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk

How can we help you today?

Basic Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay Print

Related Articles