Illumra

FAQ 3

• Device not responding to switch press
• Warranty and Terms and Conditions
• Single Rocker switch field service

Getting Started 3

• Basic Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay
• Advanced Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay (V3.1.0.X and prior)
• Advanced Linking for the 0-10V 20A Area Controller, 0-10V Fixture Controller, and 20A Universal Relay (V3.2.0.X and forward)

Electrical Questions 2

• Motor ratings
• Which dimmer should be used?

Private label options 1

• Is the Scan & Link application available for private label

Control Transmitter 2

• CUV / SLT protocol details for gateway developers
• Control Transmitter Linking Instructions

Ceiling Motion Sensor 0

Wall Occupancy Sensor 0

Thermostat 1

• Instruction manual for 5-10554-W Thermostat

Room Temperature Sensor 0

Door/Window Sensor 1

• Linking instructions / options for Window door sensors

Light Sensor 0

Actuator 0

20A Universal Relay 5

• RUV 3.3.1.5 Toggle mode does not work
• Momentary Dry-contact setup
• Basic Linking with the 20A Universal Relay
• Advanced Linking with the 20A Universal Relay (V3.2.0.5 and forward)
• Advanced Linking with the 20A Universal Relay (V3.1.0.5 and prior)

0-10V 20A Area Controller 3

• Basic Linking with the 0-10V 20A Area Controller
• Advanced Linking with the 0-10V 20A Area Controller (V3.1.0.3 and prior)
• Advanced Linking with the 0-10V 20A Area Controller (V3.2.0.3 and forward)

0-10V Fixture Controller 1

• Basic Linking with the 0-10V Fixture Controller

3-Wire Relay 3

• 3 Wire Relay Basic Linking
• 3-Wire Relay (315 MHz) Installation Guide + Wiring Diagram (E3R-R02-3HOTP, E3R-R12-3HOTP, E3R-R24-3HOTP, E3R-R27-3HOTP)
• 3 Wire Relay (902MHz) Installation Guide + Wiring Diagram (E9X-R12-3HOTP, E9X-R24-3HOTP, E9X-R27-3HOTP)

5-Wire Relay 2

• 5 Wire Relay (315 MHz) Installation Guide + Wiring Diagram (E3X-R02-5IBTP, E3X-R12-5IBTP, E3X-R24-5IBTP, E3X-R27-5IBTP)
• 5 Wire Relay (902MHz) Installation Guide + Wiring Diagram (E9X-R02-5IBTP)

Plug-in Dimmer/Relay 0

Plug-in Relay 0

xUV General 5

• Setting repeater mode in xUV Products (DUV, RUV, DUV-FX)
• Restore Factory defaults
• Errata - known issues/bugs
• 480 or 347 VAC system compatibility
• Linking a switch to a receiver

Room Controller 0

Shade Controller 0

4 or 8 Channel Relay 1

• Linking sequence for 8-channel relay

Constant Voltage LED Dimmer 2

• E3X-D02FP Installation Guide
• E3X-D02FL, E9X-D02FL, E8X-D02FL Installation Guide + Wiring Diagram

0-10V Dimmer 1

• ExX-D02FL Incompatible power supplies

E9X-HSM 1

• E9T-HSM and E9T-MDCCP Wireless Window / Door Sensor Interlock

Remote Commissioning Gateway 0

Remote Commissioning App 2

• Scan and Link
• Difference between template options when creating a group

Solutions 2

• Stairwell Motion Sensor lighting
• Wireless Lighting controls in Ice Rinks

Philips Easysense 1

• Linking ILLUMRA switches to Philips EVO200, EvoKit, Spacewise DT, SNS120, SNH200, SNS200, SNS210 MC

Enocean 1

• Communicating with ILLUMRA controllers using gateway profile

MPM BACnet Controller 2

• Lua script for basic EnOcean packet monitoring / sniffing
• Basic and Advanced Lighting Control Scripts available