Illumra

20A Universal Relay 5

• RUV 3.3.1.5 Toggle mode does not work
• Momentary Dry-contact setup
• Basic Linking with the 20A Universal Relay
• Advanced Linking with the 20A Universal Relay (V3.2.0.5 and forward)
• Advanced Linking with the 20A Universal Relay (V3.1.0.5 and prior)

0-10V 20A Area Controller 3

• Basic Linking with the 0-10V 20A Area Controller
• Advanced Linking with the 0-10V 20A Area Controller (V3.1.0.3 and prior)
• Advanced Linking with the 0-10V 20A Area Controller (V3.2.0.3 and forward)

0-10V Fixture Controller 1

• Basic Linking with the 0-10V Fixture Controller

3-Wire Relay 3

• 3 Wire Relay Basic Linking
• 3-Wire Relay (315 MHz) Installation Guide + Wiring Diagram (E3R-R02-3HOTP, E3R-R12-3HOTP, E3R-R24-3HOTP, E3R-R27-3HOTP)
• 3 Wire Relay (902MHz) Installation Guide + Wiring Diagram (E9X-R12-3HOTP, E9X-R24-3HOTP, E9X-R27-3HOTP)

5-Wire Relay 2

• 5 Wire Relay (315 MHz) Installation Guide + Wiring Diagram (E3X-R02-5IBTP, E3X-R12-5IBTP, E3X-R24-5IBTP, E3X-R27-5IBTP)
• 5 Wire Relay (902MHz) Installation Guide + Wiring Diagram (E9X-R02-5IBTP)

xUV General 8

• Setting repeater mode in xUV Products (DUV, RUV, DUV-FX)
• Restore Factory defaults
• Errata - known issues/bugs
• 480 or 347 VAC system compatibility
• Linking a switch to a receiver

View all 8

Phase Dimmer 1

• E9X-ER6CD Support resources