20A Universal Relay

RUV 3.3.1.5 Toggle mode does not work
3.3.1.5 Toggle mode does not work This issue is fixed in version 4.0.0.5 and later. As of January 1st 2016, 3.3.1.5 is the latest released firmwar...
Fri, 8 Jan, 2016 at 1:25 PM
Momentary Dry-contact setup
Dry-contact functionality The 20A relay is configured with 2 blue wires connected to an isolate relay output that can be used to interface with a dry-conta...
Thu, 18 Nov, 2021 at 4:38 PM
Basic Linking with the 20A Universal Relay
1: Hold Menu button for 5 seconds, until relay begins to click, then release the button. If a load is connected it will begin to cycle on and off. 2. Tripl...
Wed, 13 Mar, 2019 at 7:58 PM
Advanced Linking with the 20A Universal Relay (V3.2.0.5 and forward)
This information only applies for 20A Universal Relays with firmware version 3.2.0.5 and forward. In order to link devices to the relay in a...
Thu, 25 Jun, 2015 at 12:31 PM
Advanced Linking with the 20A Universal Relay (V3.1.0.5 and prior)
This information only applies for 20A Universal Relays with firmware version 3.1.0.5 and prior. In order to link devices to the relay in any...
Thu, 25 Jun, 2015 at 2:54 PM